Send Email
Send SMS
Search
Kannan Hydrol & Tools
Kannan Hydrol & Tools


Hand Tools

Our product range includes a wide range of socket set, hex socket, groz bearing packer, drill-1/2", sine vices - super precision and toolmakers steel vices - super precision.

Socket Set

REQUEST CALLBACK

Socket Set
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 5,500 / PieceGet Latest Price

Product Details:
Minimum Order Quantity5 Piece
ColorBlack, White
MaterialStainless Steel, Alloy, Iron
StandardGB, BS, ISO, DIN, IFI
Operating Voltage (volt)220V, 110V, 400V, 500V
SizeCustomize
UsageIndustrial, Garage/Workshop, Personal

Groz Sockets incorporate the super grip profile that features round points facilitating contact between socket wall & fastener wall, keeping pressure off the corners.

This ensures

1) Transmission of higher torque.

2) Firm grip & enhanced engagement.

3) Increased durability: Stress concentration

 

Yes! I am interested

Hex Socket

REQUEST CALLBACK

Hex Socket
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 64 / PieceGet Latest Price

Product Details:
Minimum Order Quantity10 Piece
MaterialBrass
coatingChrome
usagePipe Fitting
ShapeHexagonal
Head ShapeHex
Packaging TypeBox
Surface TreatmentBlack Oxide

Ideal for removing and replacing hex fasteners in automotive and machinery applications, such as hex cap bolts and screws, this hex bit socket set is perfect for any shop or garage. The hex bit socket set features high visibility markings for easy size identification and a chrome vanadium steel construction to withstand heavy use.
  • High visibility markings for easier, faster bit selection
  • Chrome vanadium steel construction
  • ANSI certified

Specification:

 

DESCRIPTIONARTICLE NO.BOX QTYMRP (Z)
1/2" Hex
;park Plug socket 16 mm
cla/1-,/;15/16/1 in10140
1/2" Hex
Spark Plug Socket 21 mm
SKT/1-2/SP/21/UG10165
1/2" Drive
Extention Bar 5" (125 mm)
DRXB/1-2/5/UG5264
1/2" Drive
Pxierrilon Par
10"(250 mm)
MPYP/1-5/18/1 IFc4A;118
1/2" Drive Universal JointUVJ/1-2/UG5519
1/2" Drive
Sliding T Handle 10" (250 mm)
SLTB/1-2/UG5528
1/2" Drive Ratchet HandleDTBIDI-1)1-51-1B)IIF:.;1488
1/2" 1/2 Drive Speeder HandleSPDH/1-2/UG51157
Adaptor
1/2" Female to 3/4" Male
SADP/1-2F/3-4M/UG5275
Adaptor
18" EMMA 4..rs 3/8" Male
E A RI3i1-3Ei3-8kAil IF.E1EA.RR
1/2" Drive L HandleLDH/1-2/UG5526
1/2" Drive
Flex Handle 15" (380 mm)
DFH/1-2HD/15/UG51184
    Yes! I am interested

    Groz Bearing Packer

    REQUEST CALLBACK

    Groz Bearing Packer
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1,575 / PieceGet Latest Price

    Product Details:
    Minimum Order Quantity12 Piece
    BrandKannan Hydrol
    Power ConsumptionNo
    ColorBlack,Red
    PackagingYes
    Part No.1
    WarrantyYes

    Bearing Packer with threaded center post for use with grease guns. The design incorporates grease nipple at one end, which easily adapts to the grease gun coupler. Suited for bearings with a min inner diameter of 1/2 (12mm) to a max outside diameter of 5 (125mm) and height from 1/4 (6mm) to 2 (50mm).
    Rugged steel construction.
    Useful for greasing bearings in Cars, boats, tractors etc .
    Yes! I am interested

    Drill-1/2"

    REQUEST CALLBACK

    Drill-1/2
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 4,862 / PieceGet Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    Hole Diameter50-100 mm, 0-25 mm, 25-50 mm, 100-150 mm, 150-200 mm
    Number Of Shaft4, >6, 3, 5, 6
    ConditionNew
    BrandBosch, Black & Decker
    Automatic GradeAutomatic
    TypePillar Drill, Rotary Drill, Electric Drill, Hammer Drill, Impact Drill
    Drill Depth(mm)30-40, 0-10
    Brand/Makemakita

    Power, mobility and weight are all considerations in choosing a drill.

    Acordless drilloffershigh mobility and a wide range of available features. Voltage ratings of 4 to 8 volts are sufficient for light-duty cordless screwdrivers, but drills with 12 to 18 volts will meet most homeowners' work needs. A high-power model handles heavier work, but more voltage means the tool has a bigger, heavier battery. A cordless drill battery needs recharging periodically. You may want to have a spare battery available so you can keep working while you recharge. To compare the run times of batteries - how long they will be effective during use - look at amp-hour ratings. More amp-hours and more volts provide longer run time, but the battery charge level, material you're working with, level of continuous use and even temperature affect how long a battery lasts



    Additional Information:

    • Item Code: M6200B
    • Pay Mode Terms: T/T (Bank Transfer)
    Yes! I am interested

    Sine Vices - Super Precision

    REQUEST CALLBACK

    Sine Vices - Super Precision
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 4,000 / PieceGet Latest Price

    Product Details:
    Body Dimensions180 x 82 x 85 mm
    Jaw Width70 mm
    Jaw Opening95 mm
    Jaw Depth40 mm
    Minute Angle Step5 mm
    Net Weight5.250 kg

    Manufactured from selected tool steel, these Solid Sine Vices are fully hardened (55-60 HRC) and tempered, mounted onto a precision hinged bottom plate. All the surfaces of the vice are precisely ground for extreme accuracy

    These are very useful for manufacturing processes that require the highest standards of clamping accuracy at desired angles

    A minute angle step of 0.2"/5 mm allows very small angles to be set with ease using standard gauge blocks
    Yes! I am interested

    Toolmakers Steel Vices - Super Precision

    REQUEST CALLBACK

    Toolmakers Steel Vices - Super Precision
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 5,000 / PieceGet Latest Price

    Product Details:
    MaterialMetal
    Jaw Opening (Inch)8 Inch, 4 Inch
    Jaw Width50-75 mm
    Jaw Depth25-35 mm
    Net Weight1.800-3.500 kg

    Manufactured from selected tool steel, these solid one piece vices are fully hardened (55-60 HRC) and tempered to ensure stability and durability

    All vice surfaces are precision ground

    The movable jaw is narrower than the base enabling vices to be used on either sides in addition to the base

    Due to their outstanding accuracies, these vices are mainly used in tool manufacturing, on grinding & milling machines, in engraving & jig boring applications, for measurement and inspection work and in manufacturing process that require highest standards of clamping accuracy
    Yes! I am interested

    groz 2 Jaw Hand Rivet

    REQUEST CALLBACK

    groz 2 Jaw Hand Rivet
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 939 / PieceGet Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    Brandgroz
    Warranty1 Month

    For Reveting
    A) Aluminium POP/Blind Rivets:
    3/32"(2.4 mm)
    1/8" (3.2 mm)
    5/32"(4.0 mm)
    3/16"(4.8 mm)
    B) Stainless Steel Rivets:
    1/8" (3.2 mm)
    5/32" (4.0 mm)
    Suitable for industrial engineering & Maintenance jobs
    Convenient change of nose pieces with wrench.


    Additional Information:

    • Pay Mode Terms: T/T (Bank Transfer)
    • Port of Dispatch: immediate delivery if in ready stock
    • Delivery Time: immediate delivery if in ready stock
    Yes! I am interested

    Makita Drill

    REQUEST CALLBACK

    Makita Drill
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1,600 / PieceGet Latest Price

    Product Details:
    Capacity10mm(3/8")
    Net Weight (Kg)1.2kg
    Model No.M0600B
    Brand Makita
    Item Weight (Kgs)1.2kg

    capacity : steel-10mm(3/8")


    Additional Information:

    • Item Code: M0600B
    • Pay Mode Terms: T/T (Bank Transfer)
    Yes! I am interested

    Centre Punches - Heavy Duty

    REQUEST CALLBACK

    Centre Punches - Heavy Duty
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 800 / SetGet Latest Price

    Product Details:
    Point Size2-10 mm
    Stock Size6-16 mm
    Overall Length90-160 mm

    Centre Punches are manufactured from selected carbon steel. These are accurately hardened and tempered so that the point will withstand continuous use and the striking end will not splinter. These are ideal for clearly marking metal in work layout & making indentations in a work piece before drilling to ensure correct location of drill points.

    Yes! I am interested

    Centre Punches - Round Head

    REQUEST CALLBACK

    Centre Punches - Round Head
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 800 / SetGet Latest Price

    Product Details:
    Point Size1.5-6 mm
    Body Diameter6-13 mm
    Overall Length75-125 mm

    Centre Punches are manufactured from selected carbon steel. These are accurately hardened and tempered so that the point will withstand continuous use and the striking end will not splinter. These are ideal for clearly marking metal in work layout & making indentations in a work piece before drilling to ensure correct location of drill points.

    Yes! I am interested

    Centre Punches - Square Head

    REQUEST CALLBACK

    Centre Punches - Square Head
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 50 / PieceGet Latest Price

    Product Details:
    Point Size1.5-6 mm
    Body Diameter7-10.5 mm
    Overall Length100-165 mm

    Centre Punches are manufactured from selected carbon steel. These are accurately hardened and tempered so that the point will withstand continuous use and the striking end will not splinter. These are ideal for clearly marking metal in work layout & making indentations in a work piece before drilling to ensure correct location of drill points.

    Yes! I am interested

    Pin Punches - Heavy Duty

    REQUEST CALLBACK

    Pin Punches - Heavy Duty
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 100 / PieceGet Latest Price

    Product Details:
    Pin Diameter1.5-10 mm
    Stock Size6-12 mm
    Overall Length100-163 mm

    Pin Punches are manufactured from high quality carbon steel, accurately hardened and tempered so that the Pin will withstand continuous use and the striking end will not splinter. These are induction hardened to ensure consistent hardness and a special tempering process prevents the head from fracturing, thereby preventing accidents
    Yes! I am interested

    Extra Long Pin Punches - Heavy Duty

    REQUEST CALLBACK

    Extra Long Pin Punches - Heavy Duty
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 100 / PieceGet Latest Price

    Product Details:
    Pin Diameter3-10 mm
    Stock Size8-12 mm
    Overall Length200 mm

    Pin Punches are manufactured from high quality carbon steel, accurately hardened and tempered so that the Pin will withstand continuous use and the striking end will not splinter. These are induction hardened to ensure consistent hardness and a special tempering process prevents the head from fracturing, thereby preventing accidents
    Yes! I am interested

    Pin Punches - General Purpose Round Shank

    REQUEST CALLBACK

    Pin Punches - General Purpose Round Shank
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 100 / PieceGet Latest Price

    Product Details:
    Pin Diameter1.5-8 mm
    Body Diameter7-11 mm
    MaterialStainless Steel

    These round shank pin punches have clean and well cut knurling which provides positive, non slip grip. This range of punches has rust inhibiting black oxide finish. These are available in 3 different lengths
    Yes! I am interested

    Brass Pin Punches

    REQUEST CALLBACK

    Brass Pin Punches
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 150 / PieceGet Latest Price

    Product Details:
    Pin Diameter1.5-8.0 mm
    Body Diameter7-11 mm
    Brass Pin Punches100 mm

    Brass Punches are ideal for delicate work on soft materials. Non-marring, they do not cause damage to the material being worked upon. These are also used to produce a gentle initial movement with a steel punch being used later to complete the job
    Yes! I am interested

    Starting Punches

    REQUEST CALLBACK

    Starting Punches
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 200 / PieceGet Latest Price

    Product Details:
    Tip Diameter1.5-12 mm
    Stock Size10-16 mm
    Overall Length (Inch)5-7 inch

    These Punches are used as a starting tool prior to using Pin Punches, as they are useful for loosening frozen or tight pins and keys, or knocking out rivets. These have a single piece construction with hexagonal shank. Manufactured from selected carbon steel, they are accurately hardened for extended service life. The working ends are machine ground with the body in premium powder coated finish.
    Yes! I am interested

    Drift Punches

    REQUEST CALLBACK

    Drift Punches
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 200 / PieceGet Latest Price

    Product Details:
    Tip Diameter2.5-12 mm
    Stock Size8-22 mm
    Overall Length200-450 mm

    Manufactured from selected carbon steel, these have a single piece construction. Punches are accurately hardened and tempered for increased working life. The working ends are machine ground with the body in premium powder coated finish.
    Yes! I am interested

    Roll Pin Punches

    REQUEST CALLBACK

    Roll Pin Punches
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 150 / PieceGet Latest Price

    Product Details:
    Ball Diameter2.5-8 mm
    Stock Size6-10 mm
    Overall Length89-150 mm

    Single piece construction with hexagonal shank imparts additional durability. Body has a premium powder coated finish with chamfered striking end that helps reduce mushrooming & chipping.

    These precision-machined roll pin punches are specifically designed to remove spring pins / roll pins. The heat -treated point has a rounded ball to center the point into the pin allowing the point shoulder to maintain maximum contact with the pin during removal and eliminating any damage to the pin or wall.
    Yes! I am interested

    Hinge Centering Punch

    REQUEST CALLBACK

    Hinge Centering Punch
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 150 / PieceGet Latest Price

    Product Details:
    MaterialSteel
    Stock Size10 mm
    Overall Length63 mm

    Hinge Centering Punches are used for starting and centering screw holes when attaching countersunk hardware such as hinges, hangars, hasps, brackets, locks and drawer pulls.

    Punch has a spring action with a hardened steel pin for convenient marking. The taper end of the punch ensures starting hole is correctly centered in the screw hole.
    Yes! I am interested

    Prick Punches

    REQUEST CALLBACK

    Prick Punches
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 300 / PieceGet Latest Price

    Product Details:
    Point Size2-6 mm
    Stock Size6-12 mm
    Overall Length75-150 mm

    Prick Punches are used for marking metals in work layouts. These punches have a very sharp point (60 Degree included angle), hence are highly suitable where very precise marking / scorring is required. These have a single piece construction with hexagonal shank.

    Manufactured from selected carbon steel, they are accurately hardened for extended service life. The working ends are machine ground with the body in premium powder coated finish.

    Yes! I am interested

    Nail Punches

    REQUEST CALLBACK

    Nail Punches
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 300 / PieceGet Latest Price

    Product Details:
    MaterialSteel
    Tip Diameter0.80-5 mm
    Overall Length100 mm

    Nail Punches are manufactured from selected carbon steel, accurately hardened and tempered for increased service life. Clean-cut knurled round shank provides a positive non-slip grip. The 3/8" (9.5 mm) square head provides a larger striking area and also prevents the punch from rolling off. The striking end is chamfered to prevent breakage. This range of punches has a black oxide finish.

    Nail Punches are designed for driving nail heads below the surface of wood. The working end is cupped to follow the nail head without sliding off. These can also be used to remove nails that have an exposed point. Place the recessed tip against the point of the nail and strike the punch with a hammer to back the nail out of the hole
    Yes! I am interested

    Automatic Centre Punches

    REQUEST CALLBACK

    Automatic Centre Punches
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 220 / PieceGet Latest Price

    Product Details:
    Body Diameter13 mm
    Body MaterialSteel
    Overall Length120 mm

    Groz manufactures a complete range of fully automatic single hand operated spring loaded punches, wherein the built in mechanism delivers a punch just with the pressing of the head

    The depth of the impression is variable and can be adjusted from light marking to heavy blows by turning the knurled head. Screwing the cap downwards produces heavy indentation; progressively lighter marking can be obtained by screwing the cap upwards. Once the knurled cap is set to the desired position, the punch will strike the same depth every time

    These have a round shank with clean and well cut knurling for positive nonslip grip. Tips are made from hardened tool steel and can be easily removed for re-sharpening or replacement
    Yes! I am interested

    Steel Stamps

    REQUEST CALLBACK

    Steel Stamps
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 120 / PieceGet Latest Price

    Product Details:
    ColorBlack
    MaterialSteel
    Stamp Size1-12 mm

    For hand held, hammer struck applications. GROZ, Letter and Number Stamps are manufactured from select quality carbon steel. Punches are through induction hardened, which gives durability and extended life for repeated use. The hardness at the stamping end is maintained at 58-62 HRC, the striking end is tempered to 35-42 HRC. This prevents the punch from splintering during use. The striking end is chamfered to prevent breakage and accidents due to flying splinters.
    Yes! I am interested

    Hollow Punches

    REQUEST CALLBACK

    Hollow Punches
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 800 / SetGet Latest Price

    Product Details:
    Overall Length (Inch)4 Inch, 8 Inch
    Tip Size (mm)2 mm, 3 mm, 4 mm
    Hole Diameter2-25 mm

    These punches are used for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic & other soft material.

    Special design of the cutting edge prevents jamming of material inside the punch. Cutting edge is induction hardened for extended working life.
    Yes! I am interested

    Arch Punches

    REQUEST CALLBACK

    Arch Punches
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 800 / SetGet Latest Price

    Product Details:
    Overall Length (Inch)4 Inch, 7 Inch
    Tip Size (mm)2 mm, 3 mm, 4 mm
    Hole Diameter5-70 mm

    These punches are used for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic & other soft material.

    Special design of the cutting edge prevents jamming of material inside the punch. Cutting edge is induction hardened for extended working life.
    Yes! I am interested

    Cold Chisels - Octagonal Cold Chisels

    REQUEST CALLBACK

    Cold Chisels - Octagonal Cold Chisels
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 900 / setGet Latest Price

    Product Details:
    Blade Width (mm)6-25 mm
    Stock Size6-22 mm
    Overall Length (Inch)4-24 inch

    Manufactured to the highest safety standards, cold chisels are individually forged from high quality alloy steel. The alloy content in these makes them ideal for all types of metalworking and masonry applications and also increases wear resistance significantly. The precisely ground cutting edge is induction hardened (52 - 58 HRC) to give improved performance over longer periods of time. Hardness at the striking end is maintained to under 42 HRC, so that the head will not splinter when subject to hammer blows. Shank is powder coated and the cutting edge is accurately ground.
    Yes! I am interested

    Cold Chisels - Concrete Point Chisels

    REQUEST CALLBACK

    Cold Chisels - Concrete Point Chisels
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 100 / PieceGet Latest Price

    Product Details:
    Point Size4-6 mm
    Stock Size13-19 mm
    Overall Length150-300 mm

    Manufactured to the highest safety standards, cold chisels are individually forged from high quality alloy steel. The alloy content in these makes them ideal for all types of metalworking and masonry applications and also increases wear resistance significantly. The precisely ground cutting edge is induction hardened (52 - 58 HRC) to give improved performance over longer periods of time. Hardness at the striking end is maintained to under 42 HRC, so that the head will not splinter when subject to hammer blows. Shank is powder coated and the cutting edge is accurately ground.
    Yes! I am interested

    Brick Bolster

    REQUEST CALLBACK

    Brick Bolster
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 80 / PieceGet Latest Price

    Product Details:
    Blade Width (mm)75-115 mm
    Stock Size22-25 mm
    Overall Length (Inch)9 inch

    Bolsters are manufactured as a single piece forging from high quality carbon steel, accurately hardened to BS 3066 specification

    The cutting edge is hardened 52 - 58 HRC with the striking end maintained under 42 HRC

    The complete Bolster is powder coated and the cutting edge is accurately ground. Each Bolster is permanently marked with safety warning message

    Brick Bolsters are also available with polypropylene hand guards. These hand guards are designed to protect the user's hands from misplaced hammer blows.
    Yes! I am interested

    Angular Machine Vices - Super Precision

    REQUEST CALLBACK

    Angular Machine Vices - Super Precision
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    MaterialCast Iron
    Jaw Width (Inch)2 Inch, 8 Inch
    Jaw Opening (Inch)2-8 inch
    Jaw Depth25-58 mm
    Net Weight3.500-95.00 kg

    Angular Machine Vices are ideal for applications where in the workpiece requires machining at an angle

    Angular adjustment is achieved via the angular slide that can be set to any desired angle 45 Degree on either sides. Additionally the fully graduated 360 Degree swivel base allows the vice to be set at any angle along the vertical axis

    These vices are manufactured from close grained hi tensile seasoned cast iron with fully hardened and ground tool steel jaws

    Ergonomically designed all steel handle allows for stress free operation. It is assembled on the spindle crank with a spring loaded mechanism providing positive grip

    Use of hi tensile grade 10.8 fasteners provides strength and rigidity to these vices

    Relief in clamp seat ensures complete surface contact as against a line contact between the "Hold Down" clamp and movable slide, thereby providing firm locking at any desired by angle

    A milled slot in the vice base helps in accurate location of the vice on the machine table using rectangular locating nuts.

    "Hold Down" slots allow for secure clamping of the vice on the machine table
    Yes! I am interested

    Rotary Head Milling Machine Vices

    REQUEST CALLBACK

    Rotary Head Milling Machine Vices
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Jaw Width (Inch)4 Inch, 6 Inch
    Jaw Opening (Inch)4 Inch, 5 Inch, 6 Inch
    Jaw Depth37-47 mm
    Net Weight20-46.75 kg

    High Precision Milling Machine Vice with a rotary fixed head

    The rotary head has 4 faces each with a different jaw optionPlain, Vertical V, Horizontal V & Prismatic

    Rotary head design eliminates the possibility of any inaccuracy, which may occur when jaws are replaced.

    Jaws can be changed by simple rotation of the Rotary Head and fixed in position using 2 hex bolts

    Manufactured from close grained hi-tensile seasoned cast iron, the vice body has a premium polychrommatic finish

    Vice jaws are made from fully hardened (55+-3 HRC) and ground tool steel
    Yes! I am interested

    Milling Machine Vices - Super Precision

    REQUEST CALLBACK

    Milling Machine Vices - Super Precision
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Jaw Width (Inch)8 Inch, 2 Inch
    Jaw Opening (Inch)2 Inch, 8 Inch
    Jaw Depth25-58 mm
    Net Weight3.500-84.00 kg

    The Milling Machine Vice is one of the most popular vices used in workshops, machine shops and shop floor. Apart from use in milling operations, it also finds application in jig boring, grinding and shaping jobs

    Manufactured from close grained hi-tensile seasoned cast iron, the vice body has a premium polychrommatic finish which is scratch and rust proof

    Vice jaws made from fully hardened and ground tool steel allow the workpiece to be held dead square without use of any packing. This not only improves efficiency and life of jaws but also helps reduce strain on vice body

    Usage of high tensile grade 10.8 fasteners provides greater strength and rigidity. The 360 Degree swivel base allows the vice to be set at any angle along the vertical axis. Vice base has a milled slot which helps in accurate location of the vice on the machine table using rectangular locating nuts
    Yes! I am interested

    Three Way Tilting Vices - Super Precision

    REQUEST CALLBACK

    Three Way Tilting Vices - Super Precision
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Jaw Width (Inch)2 Inch, 6 Inch
    Jaw Opening (Inch)6 Inch, 2 Inch
    Jaw Depth25-45 mm
    Net Weight4.0-54.0 kg

    Tilting vices provide for 3 axis setting of the workpiece in special milling, drilling, grinding, Shaping and jig boring applications

    Vices have 2 angular slides which allow the work piece to be set at any desired angle - 45 Degree tilting range on either sides and 90 Degree vertical indexing. The 360 Degree swivel base further allows rotation along the vertical axis

    Manufactured from close grained hi-tensile seasoned cast iron with fully hardened and ground tool steel jaws Vices have a premium polychrommatic finish

    Ergonomically designed all steel handle allows for stress free operation. It is assembled on the spindle crank with a spring loaded mechanism providing positive grip

    Use of hi-tensile grade 10.8 fasteners provides strength and rigidity to these vices

    Relief in clamp seat ensures complete surface contact as against a line contact between the "Hold Down" clamp and movable slide, thereby providing firm locking at any desired angle

    A milled slot in the vice base allows for accurate location of the vice on the machine table using rectangular locating nuts. "Hold Down" slots allow for secure clamping of the vice on the work table
    Yes! I am interested

    Universal Vices - Super Precision

    REQUEST CALLBACK

    Universal Vices - Super Precision
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Jaw Width (Inch)2-4 inch
    Jaw Opening (Inch)2-4 inch
    Jaw Depth22.6-32 mm
    Net Weight3.500-13.400 kg

    The most versatile of all machine vices with all degrees of freedom, the Univeral Vice allows the work piece to be set at any desired angle

    Low height construction makes these useful on even the most complicated grinding jobs

    The vice has one fixed horizontal axis which allows the workpiece to be rotated at any angle along it. Fully graduated 360 Degree swivel base allows complete rotation along the vertical axis. The third angular slide with a moving axis allows for any setting in the 3D plane

    Manufactured from close grained hi-tensile seasoned cast iron with fully hardened and ground tool steel jaws, vices have a premium polychrommatic finish

    Ergonomically designed all steel handle allows for stress free operation. It is assembled on the spindle crank with a spring loaded mechanism providing positive grip

    Use of hi tensile grade 10.8 fasteners provides strength and rigidity to these vices

    A milled slot in the vice base allows for accurate location of the vice on the machine table using rectangular locating nuts. "Hold Down" slots allow for secure clamping of the vice on the work table
    Yes! I am interested

    Self Centering Vices - Super Precision

    REQUEST CALLBACK

    Self Centering Vices - Super Precision
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Jaw Width (Inch)6 Inch, 4 Inch
    Jaw Opening (Inch)4 Inch, 6 Inch
    Jaw Depth38-45 mm
    Net Weight14.300-36.00 kg

    The Self Centering vice allows for accurate centering of jobs automatically. The vice is specially useful in applications where the same operation is to be performed on workpieces of varying sizes

    The special design allows accurate setting up of jobs with only a single machine setting. Centric clamping is particularly useful in milling, slot and groove cutting of all kinds

    Manufactured from high tensile seasoned cast iron with fully hardened and ground tool steel jaws, the vice has opposite threads for quick and accurate centering. Rotation of the crank handle automatically adjusts workpiece to the center

    Fully graduated 360 Degree swivel base allows the vice to be set at any angle along the vertical axis

    A milled slot in the vice base allows for accurate location of the vice on the machine table using rectangular locating nuts

    "Hold Down" slots allows for secure clamping of the vice on the work table
    Yes! I am interested

    Replacement Jaws & Handles

    REQUEST CALLBACK

    Replacement Jaws & Handles
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    MaterialMetal
    Material HandledBlack Trap
    FinishingPolished
    ColorSilver

    The Groz range of super precision vices comes fitted with hardened and ground tool steel jaws. Though the jaws are fully hardened. with repeated use, they may wear over time

    Jaws are available as spares, and are easily fitted on to the vice. Upon reassembly, the jaws may require a finishing / grinding cut on the top surface for complete matching

    Groz also offers special jaw pairs, with one of the jaws with both horizontal and vertical V grooves, for holding round jobs. The V grooves are precision ground to maintain high levels of accuracy
    Yes! I am interested

    Drill Press Vices - Heavy Duty

    REQUEST CALLBACK

    Drill Press Vices - Heavy Duty
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Jaw Width63-150 mm
    Jaw Opening70-170 mm
    Jaw Depth25-50 mm
    Net Weight2.40-22.50 kg

    This ubiquitous Drill Vice is more than a fixture in any workshop. It is a necessity

    These are specially designed for use by professionals who require a heavy vice

    Manufactured from close grained cast iron, this vice offers a ground vice bed for smooth & consistent jaw movement

    Jaws are hardened & ground with cross patterned 90 Degree V-grooves in the stationary jaw facilitating holding of round jobs both horizontally & vertically

    Rugged design makes these vices perfect for even the most difficult of drilling, tapping & reaming operations
    Yes! I am interested

    Drill Press Vices - Precision

    REQUEST CALLBACK

    Drill Press Vices - Precision
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Jaw Width75-125 mm
    Jaw Opening70-125 mm
    Jaw Depth30-48 mm
    Net Weight2.70-11.00 kg

    Manufactured from graded cast iron, these drill vices have been designed for accuracy, making them ideal for engineering workshops and tool rooms

    The base and slides are precision ground for stability and accurate operation

    Horizontal & vertical V-grooves in the stationery jaw allows holding of rounding job securely

    The base is slotted enabling the vice to be bolted to drill press tables, assisting in quick & accurate positioning
    Yes! I am interested

    Drill Press Vice - Unigrip

    REQUEST CALLBACK

    Drill Press Vice - Unigrip
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Jaw Width80-120 mm
    Jaw Opening75-110 mm
    Jaw Depth30-35 mm

    Manufactured from graded cast iron, these vices have a precision ground base and vice bed for smooth lateral movement of the movable jaw

    Longitudinal and transversal prisms in the fixed jaw allow for firm gripping of round jobs of different sizes both horizontally and vertically. Special seat in jaws facilitates retaining of flat work pieces

    Vices are equipped with a convenient unigrip mechanism. Spindle moves inside the hollow hand grip allowing the vice to be used at a location away from the table edge. This feature increases the scope of application of this range of vices
    Yes! I am interested

    Rapid Action Drill Press Vices

    REQUEST CALLBACK

    Rapid Action Drill Press Vices
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Jaw Width89-150 mm
    Jaw Opening97-169 mm
    Jaw Depth44-54 mm

    Manufactured from graded cast iron for extra strength and increased durability

    Precision machining of vice sides- at right angles to the base allows these vices to be used on sides in addition to being used on the base

    Vices are equipped with a rapid action mechanism - A simple half turn of the spindle in anti-clockwise direction activates the mechanism- A very useful feature in repetitive work situations for holding different size jobs
    Yes! I am interested

    Portable Cut-off

    REQUEST CALLBACK

    Portable Cut-off
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 7,500 / PieceGet Latest Price

    Product Details:
    ModelM2400B
    Brandmakita



    Additional Information:

    • Item Code: M2400B
    • Pay Mode Terms: T/T (Bank Transfer)
    Yes! I am interested

    Circular Saw

    REQUEST CALLBACK

    Circular Saw
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 8,000 / piGet Latest Price

    Product Details:
    BrandBosch, Hitachi
    Automation GradeManual
    Warranty6 months



    Additional Information:

    • Item Code: M5801B
    • Pay Mode Terms: T/T (Bank Transfer)
    Yes! I am interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Kannan Hydrol & Tools
    Kannan Y. Kesavan (Sales & Marketing Manager)
    3/18 A, Old Mahabali Puram Road , Kelambakkam,
    Chennai - 603103, Tamil Nadu, India
    Call Us: 
    Call Response Rate: 81%
    Share Us :
    F G T L



    Home  |   About Us   |  Our Product Range  |  Site Map  |   Contact Us   |   Mobile Site

    © Kannan Hydrol & Tools. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Kannan Hydrol & Tools