Send Email
Send SMS
Search
Automotive Equipment
Offering you a complete choice of products which include , boring bars square holder, drill drift key, knurling tool holder - quick action, parallel clamps and sine plates.REQUEST CALLBACK
Get Best Quote
Approx. Rs 19,705 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Model Number | ipw/1-2/std |
| Drive Size | 1 /2" to 1" |
| Brand | GROZ |
| Model | IPW3-8 |
| Max Torque | 300 to 500 Nm |
| Air Pressure | 50-100 psi |
| No load speed | <1000 rpm |
| Warranty | 1 year |
| Handle type | D-handle Inside Trigger |
| Torque | 745 |
- Robust & durable aluminium housing
- Jumbo Hammer Impact mechanism for instant high torque output for tough applications
- 5 speed position control to adjust tool speed for varying applications; both in forward & reverse directions
- Easy to use forward/reverse switch allows operator to change direction while using the tool
- Rear handle exhaust with muffler directs air away from the job & operator, ensuring safety
Additional Information:
- Item Code: IPW3-8
- Pay Mode Terms: T/T (Bank Transfer)
Yes! I am interested
REQUEST CALLBACK
Get Best Quote
Approx. Rs 16,245 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Drive Size (inch) | <3/8",3/8" to 1/2'' |
| Max Torque(Nm) | 300 to 500 Nm, <100 Nm,>500 Nm, 100 to 300 Nm |
| Air Pressure (psi) | <50 psi,>120 psi, 100-120 psi, 50-100 psi |
| No load speed (rpm) | 1000 to 3000, 7000 to 9000, 3000 to 5000, 5000 to 7000, <1000 |
| Brand | Hitachi, Dewalt, Bosch |
| Handle type | D-handle Inside Trigger, Pistol |
| Clutch type | Double Dog |
| Warranty | 2 years |
Owing to our expertise in this field, our firm is engaged in supplying an extensive array of 3/8 Impact Wrench STD
Yes! I am interested
Boring Bars Square Holder
REQUEST CALLBACK
Get Best Quote
Approx. Rs 500 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Brand | groz |
| Material | High Speed Steel |
| Size | 6-8 mm |
| Type | Reduced Shank |
| Color | Black |
| Holder Size | 1/2 x 1/2 x 2-1/4 inch |
| Suitable for Bar Size | 3/8-3/4 inch |
Manufactured from selected steel, these are ideal for holding standard round boring bars in standard toolholders or toolposts
Additional Information:
- Delivery Time: 7 days
Yes! I am interested
Drill Drift Key
REQUEST CALLBACK
Get Best Quote
Approx. Rs 250 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Type | Reduced Shank |
| Material | Stainless Steel |
| Size | 2-4 mm |
| Length (mm) | 0-30 mm |
| Color | Silver |
| Usage/Application | industrial |
Drop forged from specially drawn medium carbon steel, these Drift keys are accurately hardened for increased resistance to wear
Used for conveniently removing taper shank drills and remers from sleeves and sockets, these are blackened and have a premium shot blast finish with permanent marking of size for easy identification
Additional Information:
- Delivery Time: 7 days
Yes! I am interested
Knurling Tool Holder - Quick Action
REQUEST CALLBACK
Get Best Quote
Approx. Rs 2,300 / PieceGet Latest Price
Product Details:| Color | Black |
| Material | Metal |
| Holder Length | 150-210 mm |
| Holder Shank | 16 x 13 mm |
| Capacity | 1.6 x 57.15 mm |
| Knurl Dimensions | 19 x 9.5 x 6.35 mm |
For use with Manual lathes, these are designed to operate in a manner exerting no pressure on the lathe, compound, centres or feed screw. Knurling pressure is absorbed by the knurling tool itself
These are easier & faster to set up & produce clean & sharp knurling with no double tracking
These come complete with 1 pair of Medium Diamond pattern knurls
Yes! I am interested
REQUEST CALLBACK
Get Best Quote
Approx. Rs 1,729 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Brand | kobe |
| Warranty | 1 year |
| Overall Height | 205mm |
| Overall Width | 70mm |
| Torque Range | (fwd) 68 - 786Nm |
| No Load Speed | 7,000rpm |
Suitable for production and assembly applications.Twin hammer mechanism. Three position dial style speedregulator. Forward/reverse selection. Ergonomic and comfortablehandle grip. Fixed inlet and exhaust.Forward: position 1: 4000rpm, position 2: 5000rpm,position 3: 7000rpm.Reverse: position 1: 3000rpm, position 2: 5000rpm,position 3: 7000rpm.Collet size: 1/2” (13mm).Free speed: 7,000rpm
Maximum torque:813Nm (600ft/lbs).Recommended air pressure:6.2bar/90psi.Air consumption: 4cfm*(113ltr/min).Air inlet thread: 1/4” NPT.Minimum air hose size (ID): 10mm (3/8”).Sound pressure level: 83dBA.Sound power level: 90dBA.Vibration level: 6.8m/s2.Overall length: 183mm.
Yes! I am interested
Parallel Clamps
REQUEST CALLBACK
Get Best Quote
Approx. Rs 2,300 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Color | Blue |
| Usage/Application | Industrial |
| Material | Metal |
| Surface Type | Galvanized |
| Structure | F-Clamp |
| Capacity | 30-150 mm |
| Jaw Length | 50-200 mm |
Manufactured from case hardened steel 45 +- 5HRC. Parallel Clamps are designed for maximum strength and rigidity
All sizes are equipped with a spring clip
A retaining ring holds the loose jaw in alignment when the clamp is being opened or closed. The ends of the jaws are rounded to permit clamping under shoulders or in recesses
These clamps are extremely useful for holding work together in tapping, drilling and on various machine set ups
Additional Information:
- Delivery Time: 7 days
Yes! I am interested
Sine Plates
REQUEST CALLBACK
Get Best Quote
Approx. Rs 9,000 / PieceGet Latest Price
Product Details:| Color | Silver |
| Center to Center Distance | 3-10 inch |
| Sine System | 0-2 |
| Length | 4-12 inch |
| Width | 4-12 inch |
| Height | 2 inch |
| Tapped Holes | 1/4 inch |
Sine Plates are used as bases to which Vices, Magnetic Chucks, Angle Plates and Vee Blocks can be conveniently bolted, These are used as an inspection tool and in machining, drilling or grinding jobs
Manufactured from tool steel these are accurately hardened 54 - 58 HRC and ground square and parallel
Yes! I am interested
Tap Wrenches - T Handle Type - Professional
REQUEST CALLBACK
Get Best Quote
Approx. Rs 900 / PieceGet Latest Price
Product Details:| Material | Stainless Steel |
| Finishing | Polished |
| Color | Silver |
| Diameter | Body Length |
| Body Length | 225 mm |
| Tap Capacity | M1.6-M4 |
| Square Size | 2.0 - 3.15 mm |
Designed to give the user the reach and leverage needed for accurate tapping, these are used for holding taps, drills, reamers & other small tools to be turned by hand.
CNC machined to very close tolerances with self centering powder metallurgy hardened jaws & knurled chuck sleeve for positive grip, these are available in two types
Plain Tap Wrenches
- The smallest size TW/163 has a rigid T handle, whereas TW/164 & TW/166 have sliding T handles for greater leverage when working in tight spaces.
Yes! I am interested
Turning Tool Holders - American Pattern
REQUEST CALLBACK
Get Best Quote
Approx. Rs 3,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Material | MS |
| Color | Black |
| Brand | groz |
| Holder Size | 5/16 x 3/4 x 4-1/2 inch |
| Tool Bit Size | 3-16 inch |
| Lathes of Approx Swing | 7-10 |
Manufactured from high grade steel, these toolholders are accurately machined and ground.
Toolbits are held parallel and straight to the shank giving maximum support to the cutting edge. Set screws are made from heat treated alloy steel with hardened points for increased resistance to wear.
These are available with straight shank, right handed or left handed offset shank. Each holder comes complete with an allen key but without toolbit.
Additional Information:
- Delivery Time: 7 days
Yes! I am interested
Tyre Lever
REQUEST CALLBACK
Get Best Quote
Approx. Rs 298 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Brand | Kannan Hydrol |
| Size | Standard |
| Material | Industrial |
| Color | Silver |
| Condition | New |
| Package | Yes |
We are a remarkable entity, engaged in offering a high quality range of Tyre Levers. The offered tire lever is designed with precision utilizing the high grade components in compliance with quality standards. This tire lever is given in various stipulations to meet the specific demands of our patrons. We are giving this tire lever to our customers at their budgetary constraints.
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
Yes! I am interested
Wheel Dressers & Cutters - (Wheel Dressers)
REQUEST CALLBACK
Get Best Quote
Approx. Rs 200 / PieceGet Latest Price
Product Details:| Material | Metal |
| Color | Black |
| Dresser Wheel Range | 500-750 mm |
| Dresser Length | 255-320 mm |
| Cutter Diameter | 32-60 mm |
| Size | 0-2 |
This range of Wheel Dressers are designed for dressing, truing, sharpening and removing glaze from solid abrasive wheels. Body is powder coated. The cast iron handle is ergonomically designed for comfortable grip.
The cutters have star shaped teeth that expose new grains and provide a fresh unloaded surface on wheels. Cutters are also available as spares - set of 4.
Yes! I am interested
Adjustable Tap & Reamer Wrenches - Bar Type
REQUEST CALLBACK
Get Best Quote
Approx. Rs 600 / PieceGet Latest Price
Product Details:| Material | Metal |
| Color | Silver |
| Length | 160-375 mm |
| Jaw Holding Capacity | 2-5 mm |
| Tap Size | M2-M6 |
The Straight handle design of these tap wrenches provides greater leverage, particularly useful when working with large diameter taps
These are manufactured in three types:
- Type A : Acc DIN 1814 [No. 092D]
- Type B :Professional [No. 092R]
- Type C : Industrial [No. 092]
Yes! I am interested
Boring Bars
REQUEST CALLBACK
Get Best Quote
Approx. Rs 250 / PieceGet Latest Price
Product Details:| Material | Metal |
| Boring Bar Length | 114-368 mm |
| Boring Bar Diameter | 9.52-31.75 mm |
| Holder Length | 63-133 mm |
| Tool Bit Size | 1/8-1/2 inch |
Manufactured from selected steel, these boring bars are accurately machined
Bars incorporate broached holes that accept standard high speed steel or carbide toolbits conveniently
A complete range of single ended or double ended boring bars are available with or without the holder
Yes! I am interested
Drill Chuck Arbors
REQUEST CALLBACK
Get Best Quote
Approx. Rs 150 / PieceGet Latest Price
Product Details:| Packaging Type | Box |
| Surface Finishing | Polished |
| Color | Silver |
| Shank Mount | Morse Taper |
| Material | Stainless Steel |
Drill Chuck Arbors are used to mount a drill chuck or any other tool which has a female taper shank onto a machine such as a drilling machine which has a female taper shank socket in its workhead.
Manufactured from selected case hardened Hi-Tensile Steel (20 MnCr5/SAE8620), all arbors are case hardened 54-58 HRC for increased resistance to wear.
Precision grinding to very close tolerance with cocentricity controlled to within 0.0004" (10 microns) and accurately gauged self locking tapers ensure close tolerance fit.
Yes! I am interested
Knurling Tool Holders
REQUEST CALLBACK
Get Best Quote
Approx. Rs 350 / PieceGet Latest Price
Product Details:| Finishing | Color Coated |
| Color | Black |
| Material | MS |
| Holder Size | 190 x 35 x 16 mm |
| Knuri Dimension | 19 x 9.5 x 6.35 mm |
The rigid and robust construction of the Groz range of knurling tool holders makes them ideal for countless knurling applications.
Yes! I am interested
Knurls - High Speed Steel
REQUEST CALLBACK
Get Best Quote
Approx. Rs 500 / PieceGet Latest Price
Product Details:| Application | Automobile Industry |
| Diameter | 5/8 inch |
| Face Width | 3/16 inch |
| Hold Diameter | 7/32 inch |
| Thickness | 5/16 inch |
Manufactured from High Speed Steel, fully hardened to over 60 HRC knurls have perfectly formed short teeth. The faces are chamfered on both sides to produce burr-free work of uniform precision
Left hand knurling is produced by right hand knurls and right hand knurling is produced by left hand knurls. Diamond knurling is produced by using right and left hand knurls in pairs
Yes! I am interested
Parting Off Tool Holders
REQUEST CALLBACK
Get Best Quote
Approx. Rs 1,800 / PieceGet Latest Price
Product Details:| Length | 2-3/4 inch |
| Height | 13/16 inch |
| Width | 1/2 inch |
| Blade Size | 1/2 x 3/32 inch |
With a single piece rigid construction, hardened 45+- HRC the Parting off Tool Holder enables the blade to be held and gripped simply by a standard screw type tool post
It can be used in both front and rear tool posts and holds a bevel blade to ensure equal clearance is attained on either side of the bevel
The parting off tool holder is supplied without a blade
Yes! I am interested
Shank Die Holders
REQUEST CALLBACK
Get Best Quote
Approx. Rs 2,500 / PieceGet Latest Price
Product Details:| Material | MS |
| Color | Black |
| Shank Diameter | 12.7 mm |
| Shank Length | 50 mm |
| Suitable For Die Size | 13-16 inch |
Ideal for short or medium run threading of shafts etc. these holders are most convenient for use on lathes, milling machines, tapping machines etc.
Manufactured from solid one place steel, these have a rust proof black oxide finish. Main body is counterbored for chip clearance.
Yes! I am interested
Surface Plates
REQUEST CALLBACK
Get Best Quote
Approx. Rs 3,000 / PieceGet Latest Price
Product Details:| Color | Silver |
| Material | Steel |
| Length | 200-600 mm |
| Width | 200-600 mm |
| Overall Height | 50-85 mm |
Manufactured from high quality close grained cast iron, these plates have thick solid top surfaces, strong heavy skirts and diagonal cross-ribbed webbing on the underside which results in high rigidity and minimum deflection
Linear measurements depend on an accurate reference surface from which final dimensions are taken
These hand scraped finished surface plates provide the reference plane for work in inspection and layout
High degree of flatness, overall quality and workmanship make them ideal bases for mounting of mechanical, electronic and optical gauging systems.
Yes! I am interested
Adjustable Hand Reamers
REQUEST CALLBACK
Get Best Quote
Approx. Rs 1,000 / PieceGet Latest Price
Product Details:| Color | Silver |
| Material | Steel |
| Range | 9.5 - 10.3 mm |
| Overall Length | 120.5 mm |
The Groz range of Adjustable Hand Reamers are extremely useful precision tools for any engineering or auto-repair shop
Just 16 sizes cover diameters ranging from 3/8" - 2.7/32" (9.5 mm - 56.35 mm)
These are ideal for use on steel or nonferrous metals
The reamer blades are made from High Speed Steel, accurately hardened 60 - 64 HRC and relief ground
Each adjustable reamer has a chamfer or lead on the front end of diameter 0.004" - 0.019" according to size, which helps to make a quick start in reaming operation
Yes! I am interested
Cut Off Tool Holders
REQUEST CALLBACK
Get Best Quote
Approx. Rs 300 / PieceGet Latest Price
Product Details:| Material | Wooden |
| Finishing | Colated |
| Blade Size | 1.58 x 7.93 mm |
| Holder Size | 7.93 x 14.28 x 93.4 mm |
Manufactured from high grade steel, machined and ground to precise tolerance, these cut off tool holders support the blade over a wide area thereby reducing the possibility of blade breakage.
The locking device enables the blade to be held securely and also enables rapid assembly. Especially designed clamp plate provides both downward and sideways pressure along a large area of the top edge of the tool ensuring complete rigidity.
These are available with straight shank, right handed or left handed offset shank. Supplied with key but without blade.
Yes! I am interested
Die Stock Holders - Round Dies
REQUEST CALLBACK
Get Best Quote
Approx. Rs 900 / PieceGet Latest Price
Product Details:| Color | Silver |
| Material | Steel |
| Suitable For Die Size | 20 x 5 mm, 38 x 14 mm |
| Length | 200-315 mm |
Die holders are used for holding round dies, that are suited for efficient and clean cutting of external threads.
Die holders have a rugged construction with heavy duty set screws that hold the die firmly in place.
Yes! I am interested
Draw Bar Hammer
REQUEST CALLBACK
Get Best Quote
Approx. Rs 200 / PieceGet Latest Price
Product Details:| Material | Stainless Steel |
| Finishing | Copper Polished |
| Hammer Head Diameter | 28.5 mm |
| Socket Size | 3/4 inch |
A dual purpose hammer with a solid Brass head on one side and a 3/4" socket on other
Soft blow brass hammer head is replaceable and is very useful for hammering soft materials, loosening of collets and spindle tapers
The socket end fits 3/4" bolts on vertical mills
The 10" long handle with a soft cushion grip provides convenient leverage
Yes! I am interested
Fly Cutter Holder Set
REQUEST CALLBACK
Get Best Quote
Approx. Rs 1,000 / SetGet Latest Price
Product Details:| Shank Diameter | 12.7 mm |
| Head Diameter | 19-38 mm |
| Tool Bit Size | 3/16 inch |
| No of Holders | 3 |
Manufactured from selected steel, accurately hardened, this is an excellent tool for boring through holes or to a shoulder
The angle permits maximum sweep diameter with minimum tool projection and can machine upto 6" wide surface with a standard tool bit
Complete set consists of 3 fly cutters with shank fully counter balanced to ensure a smooth finish
Yes! I am interested
Hand Scrapers
REQUEST CALLBACK
Get Best Quote
Approx. Rs 150 / PieceGet Latest Price
Product Details:| Material | MS |
| Thickness | 4-8 mm |
| Length | 75-250 mm |
| Handle Material | Wooden |
This range of hand scrapers has been designed for removing high spots on machined surfaces for smooth and even surface on slideways, bearings, cast iron surface plates and precision marking out plates
Manufactured from selected steel these are hardened 55-60HRC and lightly tempered for lasting durability
All sizes have round wooden handle for comfortable grip during use
These find a wide variety of applications in tool rooms for small engineering jobs
Available in 3 types
- Triangular
- Half Round and
- Flat
Yes! I am interested
Lathe Carriers
REQUEST CALLBACK
Get Best Quote
Approx. Rs 1,500 / PieceGet Latest Price
Product Details:| Material | Mild Steel |
| Color | Grey |
| Packaging Type | Box |
| Holding Capacity | 6-150 mm |
Manufactured from high tensile, malleable cast iron, with an attractive grey hammertone finish, these are very useful for holding workpieces securely for smooth and even turning
Used in conjunction with a catch-plate, these act as a driving device while turning material between centres. A 'V' groove in the body helps clamping of round jobs
Yes! I am interested
Lathe Centers
REQUEST CALLBACK
Get Best Quote
Approx. Rs 700 / PieceGet Latest Price
Product Details:| Material | Stainless Steel |
| Hardness | 60-63 HRC |
| Size | 80-200 mm |
| Color | Silver |
Manufactured from high quality carbon steel, Dead Centers have a solid construction with no moving parts. Fully hardened for increased resistance to wear. Hardness of tip 60-63 HRC, these centers are accurately ground and have a TIR of +- 0.0001" (+- 2.5 microns)
Available in two types - Full and Half Dead Centers. Half Dead Centers come with a full carbon steel construction or with Carbide tips. Full Dead Centers are additionally available with High Speed Steel tips
In centers with carbide/HSS tips, the tips are brazed into a close tolerance socket for maximum strength
Carbide tip centers are preferred in applications where the workpiece has a hardness close to or more than that of Carbon Steel Dead Centers. Carbide tip imparts durability and calls for less downtime for regrinding of point. High speed steel Dead Centers are especially useful in applications that involve shock.
Yes! I am interested
Lathe Chuck Keys
REQUEST CALLBACK
Get Best Quote
Approx. Rs 200 / PieceGet Latest Price
Product Details:| Material | Metal |
| Color | Black |
| Capacity | 6-17 mm |
| Usage | Industrial |
Manufactured from alloy steel, these keys are induction hardened for increased resistance to wear. These are available in both imperial and metric sizes.
Yes! I am interested
Machinist's Jack
REQUEST CALLBACK
Get Best Quote
Approx. Rs 215 / PieceGet Latest Price
Product Details:| Usage/Application | Industrial & Automobile |
| Material | MS |
| Lifting Capacity | 454 kgs |
| Range | 25 mm |
Manufactured from high grade cast steel, the Machinist's Jack has a 1" adjustable screw and tilting swivel head
It finds application on drill presses, milling machines, planers etc. any place where leveling is necessary
Yes! I am interested
Micro Tap Guide
REQUEST CALLBACK
Get Best Quote
Approx. Rs 250 / PieceGet Latest Price
Product Details:| Material | Steel |
| Size | 3-16 inch |
| Color | Silver |
| Usage/Application | Industrial |
Handy accessory for any machinist, the Micro Tap Guide ensures you start every tap or reamer straight with perfect alignment
It has a spring loaded & hardened 3/16" (4.76 mm) diameter point that can be reversed. The pointed end guides a tap or tap wrench directly as it fits into the hole on the end of tap / tap wrench. The reversed concave end is good for smaller taps which usually have a 60 Degree taper ground at the end
The Micro Tap Guide has a fully hardened & ground 1/2" shank that can be chucked up in the lathe tailstock or the drill press
Yes! I am interested
Pin Chuck Set
REQUEST CALLBACK
Get Best Quote
Approx. Rs 100 / SetGet Latest Price
Product Details:| Holding Capacity | 0 to 0.75 mm |
| Material | Metal |
| Color | Black |
| Diameter | 14mm-34mm |
The Pin Chuck is a very useful reducing chuck used for holding drills too small to be held by a regular chuck. It is gripped in the larger chuck already on the machine by means of the back shank
Supplied with three interchangeable collets for holding small drills in varying sizes
Yes! I am interested
Pin Vices
REQUEST CALLBACK
Get Best Quote
Approx. Rs 100 / PieceGet Latest Price
Product Details:| Material | Cast Iron |
| Capacity | 1-4.5 mm |
| Overall Length | 85-102.5 mm |
| Body Diameter | 5-8 mm |
Pin vices are used for holding small taps, drills, reamers, scribers, wire, small files etc. These are available in following type
Pin Vices - Regular
This range of Pin Vices have special tool steel jaws that provide for a firm grip. A straight smooth section on the handle allows these vices to be conveniently held in machine chucks for machining operations. The handles have a hole extending through the entire length which permit holding wires of any length or diameter upto the full size of the tool. These are available as individuals or as a set of 4
Master Pin Vice
A very useful vice, it finds applications in model making and jewellery making industry. It has a single collet made of hardened steel, suitable for holding small drills, miniature tools etc. The opposite end has a large free wheeling swivel head
Yes! I am interested
Reduction Sleeves
REQUEST CALLBACK
Get Best Quote
Approx. Rs 150 / PieceGet Latest Price
Product Details:| Color | Silver |
| Overall Length | 92-218 mm |
| Material | Stainless Steel |
| Accuracy | 0.005MM |
Drill Sleeves are used to adapt smaller morse taper shank tools to larger machine spindles
The cocentricity and taper angles are precisely controlled which allows perfect locking and concentric movement to the tool held. These are available in two types:
Yes! I am interested
Tool Bits And Cut Off Blades
REQUEST CALLBACK
Get Best Quote
Approx. Rs 150 / PieceGet Latest Price
Product Details:| Square Size | 3/32 inch |
| Size | 1.52 x 7.93 x 88.9 mm |
| Length | 2-6 inch |
| Thickness | 2-3 mm |
These are suitable for use on tougher materials and all heavy duty applications that require an increased depth of cut.
Addition of cobalt gives optimum hardness and toughness thus improving the cutting performance.
These are suitable for use on lathe machines, planers, shapers etc.
Yes! I am interested
Looking for Automotive Equipment ?
X
Explore More Products
Contact via E-mail
Contact via SMS
Kannan Y. Kesavan (Business Head)
Kannan Hydrol & Tools
Kannan Hydrol & Tools
3/18 A, Old Mahabali Puram Road,
Kelambakkam
Chennai - 603103, Tamil Nadu, India
Chennai - 603103, Tamil Nadu, India
Call Us: Call Response Rate: 56%
© Kannan Hydrol & Tools. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited