Precision Engineering Tools

Approx. Rs 90 / PieceGet Latest Price

Product Details:

An extremely versatile tool that can be used as anAngle Finder, Center Locator& aLevelling Gauge

Tool is designed to give accurate reading of angles for full 360 Degree via an extremely sensitive & balanced needle

The protractor body is encased in cast aluminium shell with legs made from cast iron. The Vee bases have inbuilt magnets that exert magnetic pull both within the Vee & across the bottom surface of the legs of the Vee. This allows the tool to attach instantly to any ferrous surface-round or flat for accurate measurement of angles

The Vee bases are precision ground and the center pin shows the middle point for locating centers on round objects. Can also be used for leveling work on workpieces

Approx. Rs 3,800 / PieceGet Latest Price

Product Details:

Made from fully hardened 50-55 HRC and ground tool steel, these precision Adjustable Angle Blocks are useful for most drilling, milling and set up jobs where a particular angle to a reference face is required

The block is fully adjustable from 0 Degree-60 Degree and can be set at any desired position by locking of the hex screw located in the base

Approx. Rs 1,300 / PieceGet Latest Price

Product Details:

Manufactured from high quality spring steel, Straight & Knife Edges are fully ground and hand scraped for a perfectly flat surface. Hand scraping removes all the high points left from grinding making these an extremely accurate tool

The thickness and design permit these to retain shape & accuracy yet convenient to carry around

Used for drawing & scribing straight lines, checking surfaces for straightness, setting up machines such as planers etc. these are available in two types

• Straight Edges -These have flat edges on both sides
• Knife Edges -These are flat on one side and have a bevel on the other that provides an excellent visual line contact with the work piece

Approx. Rs 400 / PieceGet Latest Price

Product Details:

Can be used as

• A Drill Point Gauge for checking 59 Degree angle drill points
• A Protractor for measuring and laying out angles
• A Center Finder for locating centers on shafts and circles
• A Circle Divider for dividing circles into sectors, polygons andpolygrams (up to nine equal parts)
• Tap and Drill Table shows popular tap sizes and corresponding drills sizes for American National threads

Approx. Rs 7,500 / PieceGet Latest Price

Product Details:

Compact and verstile Comparator Stands especially useful for fast and efficient dimensional inspection on production parts

The stand comprises of a sturdy cast iron base precisely ground and machined providing a totally flat surface. The anvil is hardened 55-58 HRC for greater wear resistance and lapped for high accuracy setting of jobs

The longitudinal slide can be adjusted to different positions using the knurled knob. It moves along the ground steel pillar at accurate right angles to the base. Fine adjustment feature for accurate setting of jobs.

Specification

Approx. Rs 1,000 / PieceGet Latest Price

Product Details:

Two sets of quality tools suitable for turning and allied trades and for fitting and general trades. These sets come in handy and useful for the apprentice and the established engineer alike

Each set of tools is fitted into a specially designed durable wallet with the contents detailed on the wallet.

Specification

Approx. Rs 2,500 / PieceGet Latest Price

Product Details:

Precision made tool performing all of the functions that would normally require usage of various shims, blocks or machinist's jacks. Ideal for inspecting shafts and parts with multiple diameters

Anvil height on the block is easily adjustable to support shafts, bars of varying diameters making for quick inspection without having to use centers

Vibration lock (position lock) prevents creeping

Approx. Rs 2,500 / PieceGet Latest Price

Product Details:

Specification

Approx. Rs 6,500 / PieceGet Latest Price

Product Details:

Made from close grained cast iron, these blocks are precisely ground and machined square and parallel

The Vee's are 90 Degree centred in true

The blocks are manufactured and supplied in numbered pairs and come in handy for holding large jobs where clamping is not necessary

Approx. Rs 50 / PieceGet Latest Price

Product Details:

Made from selected tool steel, these are fully hardened and ground. Squares have accurate right angles on the inside and outside. Both the blade and stock are made from a single piece of steel which ensures straightness and parallelism.

This range of squares comes in handy fot setting up, checking machinery & in everyday workshop use.

Specification

Approx. Rs 200 / PieceGet Latest Price

Product Details:

Whilst ideal for everyday workshop use, these are also suitable for woodworking applications.

Made from selected steel with hardened blade, these squares have accurate right angles both on the inside and outside.

Both the blade and stock are accurately ground which ensures straightness and parallelism.

This range of squares comes in handy for setting up and checking machinery, checking Carpenter's squares or using as a trysquare when marking joints or testing faces & edges.

Approx. Rs 500 / PieceGet Latest Price

Product Details:

Manufactured from selected steel, the legs are exceptionally rugged and well finished. The leg that holds the adjustable point is offset. The locating lug is incorporated in the straight leg.

These are very useful in layout work for locating and testing centres, laying off distances from an edge etc. Working faces hardened to 58 HRC

Approx. Rs 200 / PieceGet Latest Price

Product Details:

These rugged industrial grade compasses are manufactured from heavy gauge steel with an attractive black power coated finish. The tip is accurately ground. Heavy duty hinge and knurled nut help in convenient movement.

Used for precisely scribing arcs and circles on projects and drawings.

Specification

Approx. Rs 160 / PieceGet Latest Price

Product Details:

Designed for reliable, accurate layout and measurement jobs, these are of immense use to toolmakers and all mechanics who require finer adjustment and better balance

Precision made to rigid standards throughout. Manufactured from high grade steel, the legs are machined to a smooth taper. Fulcrum stud has a large bearing surface preventing side deflection of legs. The finely machined solid nut runs smoothly to secure legs exactly to dimension

Divider points are hardened 50-55 HRC for increased wear resistance

Approx. Rs 240 / PieceGet Latest Price

Product Details:

Manufactured from stainless steel, the Degree Protector comes with a semi-circular or a rectangular head

The head has permanent deep etched graduations, 0 to 180 Degree in opposite directions thus permitted reading an angle directly and also its supplement

The 6" (150 mm) blade has a graduation line on one end that permits accurate setting and reading of angles. The blade can be firmly set at the desired angle by means of a knurled nut

This is an ideal tool for machinists, draftmen and mechanics for setting bevels, transferring angles, small squaring tasks, checking cutter clearances within limits etc.

Approx. Rs 400 / PieceGet Latest Price

Product Details:

A versatile tool, the Depth Gauge with Protractor allows for measurement of both angles and depths

Manufactured from stainless steel, the protractor head has permanent deep etched graduations, 0-180 Degree in opposite directions, thus permitting reading an angle directly and also its supplement

Depths are measured by a 6" (150 mm) steel rule. It is graduated in imperial dimensions on one side and metric on the other and can be set at any desired angle for use as a protractor and lengthwise when used as a depth gauge. A knurled thumbnut locks the rule in the desired position

The gauge has a flat surface on the back of the head permitting laying the tool flat upon the work. The rectangular head provides additional convenience as it incorporates 4 working edges

Approx. Rs 400 / PieceGet Latest Price

Product Details:

The ability to measure depths and angles is combined in this versatile tool

The head is made from selected steel and has an attractive black finish. It is graduated both left and right to 15 Degree, 30 Degree, 45 Degree and the rule can be set to any of these angles

A 6" (150 mm) steel rule is fitted to the head and can be locked in final position for depth or angular measurements by a knurled nut

Approx. Rs 200 / PieceGet Latest Price

Product Details:

Manufactured from stainless steel with permanently engraved graduations

Accurate taper throughout the length of the gauge makes it a convenient tool for measuring diameters of small holes, slots etc.

With imperial graduations on one side & metric on the other, this is an ideal tool for die makers, machinists and on inspection floors

Approx. Rs 230 / PieceGet Latest Price

Product Details:

Made from heavy gauge hardened stainless steel, these are available in two versions -Round&Rectangular

These gauges are designed for measuring steel wire, hot &cold rolled steel sheet etc & check sizes from 0 to 36 gauge

The round gauges have metric dimensions marked on one side and gauge markings on the other. The rectangular gauges have both metric and gauge markings on the same side

Approx. Rs 600 / PieceGet Latest Price

Product Details:

A basis tool for machinists and toolmakers, the Universal Surface Gauge is used for accurately scribing lines, transferring measurements or probing surfaces in inspection work. Design incorporates

• A fully hardened and ground base which serves as an accuratereference surface
• A machined Vee groove in the base allows the gauge to be usedconveniently on curved surfaces
• A Vee groove at the front end allows the spindle to adjust to any angle above or below the base allowing it to be used as aheight gauge and also as a depth gauge.
• Two retractable pins allow the gauge to be located against the edge of a surface plate or T-slot for linear work.
• A 1/4" (6.35 mm) hole in the spring loaded scriber holder allows a dial indicator to be attached conveniently making the gauge usefulfor checking flatness, parallelism, heights, depths etc.

Specification

Approx. Rs 600 / PieceGet Latest Price

Product Details:

An indispensable clamping device for precise and stable measurements, it is most useful to speed up production and quantity inspection jobs

The body is made of close-grained cast iron precisely machined to close accuracies. The swivel clamping pad is made from Aluminium which helps eliminate any damage to the measuring device

Both clamping and positioning of the micrometer is achieved using a single clamp

It is highly useful for sorting parts in batch inspection and for incoming inspection purposes

Approx. Rs 800 / PieceGet Latest Price

Product Details:

Edge & Center Finders are time saving positioning tools for use in jig boring, milling machines etc. These are used for accurately locating work edges, shoulders, grooves, center point & scribed lines.

Manufactured from precision ground tool steel, these are case hardened 45-48HRC.

The diameter & cocentricity are controlled to within 0.0002"
(5 microns).

Approx. Rs 4,000 / PieceGet Latest Price

Product Details:

An easy, accurate & time saving tool for precisely locating work edges, shoulders, grooves etc. for use both on conventional & CNC machines

Edge finder body is made from Aluminum, with a precisely ground cylindrical steel stylus, 6 light ports, LED & a 12V battery

Edge finder lights instantly when the stylus touches the work edge. Designed with 6 equally spaced light ports for visibility from any angle

Approx. Rs 4,000 / PieceGet Latest Price

Product Details:

Designed for 2D aligning of component reference surfaces & edges, determining bore centres with reference to the centre of the machine spindles

Edge finder has an Industrial Robust & non wearing design, with the body made from hardened steel & a spring loaded highly accurate steel ball

On contact between the spherical tip & the metal component, the unit lights up, thus identifying the point of reference

Approx. Rs 2,300 / PieceGet Latest Price

Product Details:

Made from close grained cast iron, these Vee Blocks are precisely ground and machined square and parallel

Each Block incorporates 4 different sized Vee's thereby supporting a wide range of sizes. This enables a single block to be used as a workholding device for supporting different sized jobs

Manufactured and supplied in matched and numbered pairs, these are very useful for marking and checking of cylindrical parts

The larger sizes incorporate a cavity on either side for convenient handing.

Approx. Rs 5,000 / PieceGet Latest Price

Product Details:

These magnetic bases equipped with powerful permanent magnets can be readily located on any ferrous surface and are ideal for all applications that require a magnetic pull of upto 60kg (130lbs)

The base and one side are energised for attachment to flat surfaces. Vee groove in the base facilitates gripping on curved surfaces

Unique design allows Dial Indicator to be set at any required position and easily adjusted for use. The bases have an attractive grey hammertone finish, base post and gauge holding rod are chrome plated

Approx. Rs 350 / PieceGet Latest Price

Product Details:

Pot Magnets are used for lifting holding & locating ferrous parts.

Aluminium, Nickel and Cobalt Steel alloy content makes them strong and permanent. Unique combination of strong magnet with nickel chrome plated insulating ring gives these magnets the superior holding power of larger ones.

The rear face of the magnet is provided with a tapped hole for attaching to fixtures and machines

Compact design with very strong magnetic pull makes these a favourite in all workshops, tool rooms etc.

Approx. Rs 1,000 / PieceGet Latest Price

Product Details:

Manufactured from a single piece of hardened tool steel, these angle plates are precision ground, square and parallel

A Convenient step of 1-1/4" (32 mm) down from the top and a 1/2"
(12 mm) seat for use with smaller work pieces

Presence of 24 tapped holes allows for fastening to fixtures and clamping work to the angle plate

An indispensable device for accurate work in tool rooms and in small production jobs for checking flatness, squareness and parallelism

Approx. Rs 650 / PieceGet Latest Price

Product Details:

Sine Bars are used in conjunction with a gauge block or an adjustable parallel to attain the required height and to set up angles for layout and inspection purposes

Manufactured from Tool Steel, these are precisely hardened 58-62 HRC and ground for extreme accuracy in use. Edges are chamfered 0.5 x 45 Degree for convenient handling and supplied with a back plate

Approx. Rs 75 / PieceGet Latest Price

Product Details:

Manufactured from stainless steel, these small flat gauges have angles of 55 Degree and 60 Degree

very useful for grinding and setting thread cutting tools, these may also be used for checking the pitch of threads through the permanently deep etched graduations in 14ths, 20ths, 24ths and 32nds of an inch

These gauges meet the American National or US 60 Degree, Whitworth or English 55 Degree specifications

Approx. Rs 1,800 / PieceGet Latest Price

Product Details:

Wiggler/Center finder with its four interchangeable attachments is a versatile tool that finds application in many places

The attachments can be snapped onto the chuck without removing the collet nut and are clamped by a ball swivel joint which permits adjustment to an angular position

With needle point shark, working centers can be accurately located. Spring tension on the ball of the point permits guiding the point to true concentricity bringing perfect alignment between the work and machine spindle

Wiggler with Ball Contact is useful in locating work by first bringing the ball contact against the work and then indexing it to the desired position relative to the spindle

Wiggler with Disc Contact is particularly useful in locating work in confined areas such as slots or shallow holes. Diameter of Disc. 0.1"

Wiggler with Offset Indicator holder is useful for checking run out or concentricity and in checking straightness or alignment of flat surfaces

Product Price :Get Latest Price

Product Details:

High Precision Multi Purpose Vee Blocks - ideal for use in layout work in tool rooms

Designed for holding square or round pieces with high accuracy

Blocks have stepped grooves that allow the clamps to be inserted without protrusion allowing blocks to be used on ends or sides in addition to the base

Blocks are hardened within 50-55 HRC. Matched pair of Vee Blocks are perfectly aligned with 90 Degree Vee grooves ground central and parallel to the sides and base

Available as matched pairs complete with two clamps

Product Price :Get Latest Price

Product Details:

Manufactured from selected steel, Vee Blocks are fully hardened and ground.

Following enhanced features incorporated in the design render greater versatility to this Vee Block set

Product Price :Get Latest Price

Product Details:

The "Versatile" Vee block is made from finely selected tool steel fully hardened to 55-60 HRC

The Special design with 90 Degree Vee angle provides a quick, accurate and positive means of holding workpieces for machining, grinding and in layout and inspection work

In addition to use on base, the Vee block can also be used on its side or end

The unit comes complete with a reversible swing away style clamp that clamps against almost any shape or product

The three tapped hole positions in the Vee block for the clamp allows the clamp positioned at either end or at the centre of the Vee block

Tapped holes on the Vee block end allow mounting the block perpendicular to the face plate. Each unit comes complete with the basic block, reversible clamp and 2 clamp screw

Product Price :Get Latest Price

Product Details:

A convenient, accurate and time saving tool for knowing the height offset of the work piece from the cutting tool

Gauge lights up instantly when the cutting tool touches the probe on the gauge resting on the work piece

Hardened and precision ground body. 4 equally spaced light ports for visibility from any angle. Spring loaded probe safeguards against damage from overrun. Reads off any electrically conductive metal

Approx. Rs 50 / PieceGet Latest Price

Product Details:

Manufactured from hardened and polished stainless steel, all gauge surfaces are accurately ground

It is most useful for checking tool angle while cutting threads in metal turning lathes. The angle on the thread cutting tool is checked on the V slots in the gauge

Product Price :Get Latest Price

Product Details:

Groz manufactures a comprehensive line of steel and aluminium body scribers for machinist's, engravers, mechanic's and craftsmen

Basic tool for scribing and marking, Scribers can be used in metal, glass, plastics and ceramics. Scribers are finely tapered permitting better sighting during work

MS/81 & MS/83Pocket Scribers with replaceable hardened and ground tool steel points. Point reverses into the knurled body for safety. Hex head cap prevents the scriber from rolling down. Used for marking & scribing on steel, copper, brass and aluminium

MS/84Replaceable Needle Point Scriber with 4 extra needle points. Plated steel body with knurled handle and hex cap that prevents the scriber from rolling down. Spare needle points are stored in the handle under the cap. Used for marking & scribing on metal, glass, plastics & ceramics.

MS/85Single Point Scriber. Knurled steel body with hardened and tempered point